Product Overview
The P65M is an integrated power solution launched by Hobbywing for heavy-load industrial UAVs. The kit includes a brushless motor, FOC ESC and carbon fiber propeller, pre-matched and calibrated at the factory, ready to use after installation. The system has a rated output power of 8.6KW, with a recommended continuous thrust of 65kg per shaft and a peak thrust of up to 130kg, supporting heavy-load multirotor platforms to complete heavy cargo lifting, logistics delivery and other operations.
The power system supports 280~450V wide voltage input, compatible with 96~107S LiPo battery packs. The high-voltage architecture brings lower line loss and higher system efficiency. The ESC adopts FOC driving algorithm for smooth operation, low noise and high efficiency, supports CAN, RS485, PWM control protocols, and integrates black box data recording. IP67 dust and water resistance enables it to adapt to complex outdoor working conditions. The motor adopts 36N42P pole design with abundant torque, and has built-in temperature and position sensors for real-time status monitoring. The matched carbon fiber straight propeller features high strength and low deformation, balancing thrust efficiency and structural reliability.
Specifications
1. Overall Power System
| Item |
Specification |
| Model |
P65M |
| Max Thrust |
130kg |
| Recommended Thrust Per Shaft |
65kg |
| Recommended Thrust Efficiency |
6.3g/W / 5.4g/W |
| Voltage Range |
280~450V DC |
| Rated Voltage |
335V |
| Compatible Battery |
96~107S LiPo |
| Compatible Carbon Tube Diameter |
Φ60mm |
| System Weight (w/ wires & prop) |
7465±60g / 7185±60g |
| Cable Spec |
Power wire: 10AWG×400mm; Signal wire: 800mm |
| Operating Temperature |
-35~55℃ |
| Dust & Water Protection |
IP35 |
| Rated Input Power |
10.4KW |
| Rated Output Power |
8.6KW |
| Item |
Specification |
| Model |
100A-FOC |
| Communication |
UAVCAN / RS485 |
| Dimensions |
225×98×60mm (with connectors) |
| Weight (w/ wires) |
1200±20g |
| Peak Current |
100A (3s) |
| Continuous Current |
40A |
| Dust & Water Protection |
IP67 |
| Dual Throttle Protocols |
CAN+RS485 / CAN+PWM / RS485+PWM |
| PWM Pulse Width |
1100~1940μs (calibration not supported) |
| Black Box |
2~48h real-time data recording |
| Item |
Specification |
| Model |
15645 |
| KV Rating |
9.5KV / 11KV |
| Dimensions |
Φ167.1×110.5mm |
| Slots/Poles |
36N 42P |
| Dust & Water Protection |
IPX5 |
| Weight (w/ wires) |
5115g±50g |
| Temperature Sensor |
Standard |
| Position Sensor |
Standard |
| Item |
Specification |
| Size |
72×25 inch / 64×20 inch |
| Weight Per Blade |
1150±20g / 870±20g |
| Material |
Carbon fiber straight propeller |
| Mounting |
D60-6*M6, center hole D20 |
Applications
Heavy-load logistics UAVs, industrial heavy-lift drones, fire-fighting and rescue multirotors, heavy-load mapping and inspection platforms, suitable for outdoor industrial operations, long-range heavy-load flight scenarios.
